Pipe hanger and support, constant spring hanger and support,variable spring support
Main features of Hengli support
Unique design of constant force hanger
The structure of the constant force type supporting hangers of Bideli Energy Equipment (Jiangsu) Co., Ltd. is unique. It uses three sets of high-quality springs, and through a precisely calculated design of the transmission device, to maintain a constant force within the specified load and displacement interval, and always ensure that the direction of the force is vertical, which is the current international advanced structural form. Its performance far exceeds the products of other domestic factories. There are obvious scales on the panel of the support and hanger, which can directly read the cold and hot displacement and load values. Before leaving the factory, all the hangers are locked in the cold position with red clips. After installation and water pressure test, they are removed and placed on the side earrings.
Special stable spring
For the hanger, the spring is the most important component, which directly determines the long-term stability and safety performance of the hanger. Our company adopts special treatment technology (spring pre-relaxation treatment) and anti-corrosion treatment to make the performance of the spring far better than general products.
Constant force hanging form
By virtue of the building block design, Bedelier Energy Equipment (Jiangsu) Co., Ltd. produces three types of basic supports and 43 different combinations of loads and strokes.
The standard design of the constant force crane has a working range of 0.1KN-400KN and a maximum stroke of 900mm. At the same time, according to the special requirements of customers, non-standard design can be carried out to meet the special requirements of users.
Main specifications of constant force hanger
11 series: single group constant force support hanger; 12-14 series: multiple groups of constant force support hanger; 16 series: constant force bracket.
Standard product performance: the maximum load can reach 400KN; the stroke can reach 900MM; the load deviation ± 3% (VGB standard ± 5%), which can reach ± 2%.
Inspection of Constant Force Support
According to the requirements of customer orders, set and test each constant force support and hanger, and issue a separate performance test report. To ensure that each manufactured product meets the required standards.
Function of spring support hanger
In order to prevent the external force from directly acting on the pipeline system, the normal thermal displacement of the pipeline and other pipe fittings must be prevented from being obstructed and limited. Therefore, the pipeline must be elastically suspended or supported according to a certain rule. Instead of constant force support hangers to play this role. The allowable load deviation is usually limited to 25% of the working load. When this range is exceeded, a constant force support hanger is used. The constant force support hanger can achieve constant force suspension and support over the entire travel range.
Features of spring-supported hangers
Qianyuan Feida's spring support hangers are the same as Hengli support hangers. All basic spring design guidelines strictly follow the relevant regulations in international standards MSS SP58 and VGB-R510L. Adopt special heat treatment process (spring pre-relaxation treatment) and special surface anti-corrosion treatment of electro-impregnated epoxy resin coating. The shell is formed by cold extrusion without welding seams. After special treatment, the spring support hanger has a long service life and good corrosion resistance.
The advantages of the product structure can be summarized as follows
The main specifications of the spring support hanger
21 series: spring hanger
25 series: spring hanger
29 series: spring bracket
20 series: articulated spring bracket
27 series: damping spring
Load setting and locking of spring-supported hangers
FIDAK spring support hanger is preset to the installation load in the factory and locked in both directions of displacement. Factory settings are performed on a calibrated electronically controlled test machine with the following features:
Mental Symmetrical design constant support hanger with support brackets Double load-tube guiding
Product description
Constant hangers and constant supports have a special design that allows for transforming the spring force into a constant force through a large vertical displacement range
Features
Mode of operation
The mode of operation is based on the arrangement of three springs according to the parallelogram of forces. The design is distinguished by a high degree of functional precision along with wide load adjustment ranges.
Application
Constant hangers are used for piping and related components where higher levels of vertical travel occur. Their job is to transfer the working load over the whole travel area while keeping it constant, i.e. without any considerable deviations. The functional precision of the constant hangers is decisive for favourable long term behaviour of the components involved.
Portable Pipe Constant spring Hangers for various pipe installation
Product description
Constant force constant crane is designed according to the principle of torque equalization.Under the allowable load displacement, load torque and spring torque always adhere to the balance.For the pipe and equipment supported by the constant crane, it can provide a constant supporting force when the displacement occurs, so it will not bring additional stress to the pipe equipment.
The constant crane is generally used in the center where the displacement stress is reduced, such as the suspension part of the boiler body of the power station, steam, water, smoke, wind pipe and extinguisher of the power plant, and the center where such supports are required in the petroleum and chemical industries.When the thermal displacement of a lifting point in the pipeline system is greater than 12mm, it is appropriate to choose a constant crane to support, in order to prevent the pipeline system from generating risky bending stress and adverse stress transfer.
Features
Rated load: 0.2 ~ 400kN displacement: 0 ~ 508mm
Allowable field load conditioning quantity :±10%
Technical parameters
Regular load dispersion (including friction) within full travel :≤6% uniform load and design load dispersion within full travel :≤2%
When locked, 2 times maximum working load is acceptable.
Structure composition and working principle
Our company mainly operates and consumes the spring type constant force support and hanger, and can also provide the main and auxiliary spring type or other ways of constant force support and hanger according to the user's request.The spring constant force support hanger is designed according to the principle of torque equalization.It relies on the exquisite geometric design, so that load torque and spring torque in the work process has been balanced, in order to adhere to the constant support force, can eliminate or reduce the additional stress on the pipeline or equipment.
Main and auxiliary spring type constant force support hanger is designed according to the principle that the resultant force is constant under the action of the main spring force and the auxiliary spring force.
The spring type constant force support hanger is mainly composed of cylindrical spiral spring and lever mechanism.Because its spring and component manufacturing technology is simple, mature, the product performance is stable, the economy is good, has been used for a long time in the domestic, therefore is the most widely used type;The performance of the constant force hanger with the butterfly spring is relatively difficult to control, while the main and auxiliary spring constant force hanger requires high precision of the spring, so it is relatively difficult to manufacture, so it has not been widely used.
The company USES the introduction of ITT Grinnell support hanger design, manufacturing technology, the introduction of the domestic production of 58 series of constant force support hanger, with a variety of ways, selection of bento, excellent performance characteristics, by domestic and foreign users.
Contact Person: Qi Emily
Tel: 15312357668
Fax: 86-0511-88412778
304 Stainless Steel Bellows Expansion Joint Absorb Thermal Expansion And Shock
Professional Steel Pipe Expansion Joint / Shock Absorber DN32-DN2000
Flange Connection Pipe Type Expansion Joint , Carbon Steel Expansion Bellows
Galvanized Rubber Rubber Flex Joint For Water Drainage , Pipe Expansion Joint
Industrial EPDM Rubber Expansion Joint Carbon Steel Flange Type Reduce Vibration
Single Sphere Flexible Rubber Expansion Joint DIN Standard Used In Piping System
Metal Single Hinged Expansion Joint For Eliminates Pressure Thrust Forces
Single Hinged Plumbing Expansion Joint for Absorb Pressure Thrust OEM Accepted
SS Material Hinged Type Plumbing Expansion Joint , Pipe Bellows Expansion Joint