industrial Water filter

Stainless Steel Industrial Reverse Osmosis Water filter

Product description

The filter consists of a cylinder, a stainless steel strainer, a blowdown section, a transmission, and an electrical control section.

During Filter operation, the water to be filtered enters through the nozzle, flows through the filter screen, enters the pipeline required by the user through the outlet for process circulation, and the particle acrobatics in the water are trapped inside the filter screen. With such continuous circulation, more and more particles are trapped, the filtration speed is getting slower and slower, and the sewage entering the II is still continuously entering, and the filter holes will become smaller and smaller, thus between the inlet and the outlet. The pressure difference is generated. When the large difference reaches the set value, the differential pressure transmitter transmits an electric signal to the controller to control the crying start drive motor to drive the shaft to rotate through the transmission component, and the sewage outlet is opened and discharged by the sewage outlet. When the filter is cleaned, the pressure difference drops to the minimum value, the system returns to the initial filter, and the system runs normally.

Features

As per the industry standards

Easy maintenance

Durable

Automatic cleaning and filtration, automatic sewage discharge.

The cleaning filtration cycle can be adjusted, and the cleaning filtration time defaults to 10-60/s.

The amount of water lost by washing and filtering is only 0.08-0.6% of the filtered water volume;

Filtration accuracy can reach 10-3000 microns:

Working pressure can reach 1.0-1.6Mpa:

Single flow: 4-4160m3/ho

Can be installed in any position in vertical, horizontal or inverted orientation

Specification

Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions,molecules, and larger particles from drinking water. it could apply to both industrial processes and the production of potable water.

Industrial water treatment sand filter to remove dissolved solid and suspended solid

Product description

shallow sand filter works as a by-pass filtering equipment of closed industrial circulating water is used to filter the circulating chilled water and its control modes consist of manual backwash and automatic backwash. The system is generally backwashed once every three to seven days in the circulating process, effectively improving the quality of chilled water and ensuring excellent and stable water quality after intervention to long-term running. The device has small water consumption and is widely used in the cleaning of all types of industrial and commercial chilled water circulation system as well as refrigerant water and heat medium water systems of central air conditioning, improving the stability of equipment operation. Users may weld and conned in parallel the by-pass filters in main return pipes depending on the conditions of circulation system and the pipe diameter should be determined based on the retaining water yield of parallel circulating water. The sewage water is then discharged into the sewerage network.

Working principle

For the by-pass filtration, the filter is installed in the main circulating pipeline to filter all the circulating water, but a part of the circulating water LED from the main circulating pipeline is filtered, which is a repeated circulating interception step by step to filter the impurities within the system and finally remove the impurities by the necessary backwash out of the system. Installing a by-pass filter in the circulating water system can prevent the terminal pipe of device from sludge blocking and remove the impurities in the system with chemical dosing.
By-pass filtration is used to reduce the turbidity of the water circulation system, exactly, to reduce slime and prevent its deposition in the heat exchanger, so that the effect of agent will be better.

Size of Solids to be Removed: The smaller the solid to be removed, the slower the water must pass through the media and the finer the granule of media must be. Very often the end user doesn’t know how small a solid must be removed. In those situations, how the filtered water will be used will determine how small a solid should be removed.

Concentration of Suspended Solids: The higher the concentration of suspended solids, the larger the diameter of the filter needs to be. All filters have a maximum concentration of suspended solids that can be managed without compromising filter performance.

The characteristics of the filtration system

1. Manual or automatic control is available;
2. Water distributor is simple, uniform and reliable;
3. Finished water collector has high strength and long service life;
4. Easy to install. Only connect the inlet and outlet to the waste pipe when installing;
5. Less water consumption in backwash: A homogeneous filter is used, so that backwash cycle is extended and the total backwash water volume is greatly reduced;
6. High backwash efficiency: An advanced water collector is used, ensuring efficient backwash effect.

Industrial Quartz Sand activated carbon water filter

Product description

Features

Stainless Steel or Carbon Steel Sand Filter / Active Carbon Filter

Also called Mechanical filter

Categories:

• 1: Multi Media filter ,
• 2: Active carbon filter,
• 3: Quartz sand filter etc.
• 4. Easy to manage, low operating cost
• 5. Filter media durable and recyclable
• 6. Most practical, cheapest and basic filtration equipment

Application

Mechanical Filter (Alao called pressure filter ), It's very important procedure in pure water pretreatment and water purify system.

In water treatment field, filtration is a kind of water purifying process.Mostly filter medias are silica

sand (widely use),anthracite and so on. Filter medias include three type:granular, powdery and fibroid. Silica sand,anthracite, activated carbon, megnetite,ceramic, plastic ball, ect.

According to actual demands, some multi media filter (filter bed) will use two kinds of media layers. In industrial water recycling system, can effectively remove impurity,absorb oil ect, at last to reach

water recycling standard. Mainly functions are remove suspended or colloidal impurity, especially

effectively remove small particle and bacterium, also can remove BODs and COD in certain level.

Activated Carbon Filters Metal Industrial Water Filters

Product Description

Automatic Backwash Multimedia Quartz Sand Filtration For Water Treatment

Product description

Automatic Backwash Bypass Sand Filter is consisted of a filtration system and a control system. Filtration system generally consists of the filter unit, three automatic valves, import and export pipeline, sewage pipeline. The filter unit includes a filter medium. Control system usually consists of PLC timing controller, differential pressure controller, and electromagnetic three-way valve.

Automatic Backwash Bypass Sand Filter is a high efficiency filter, It can effectively remove the suspended substance, microorganisms, and other fine particles in water. Ultimately achieve to reduce water turbidity, purify water quality.

Used in the treatment process, mainly for turbidity water treatment, reverse osmosis, and pretreatment preparation of ion exchange softening desalination system

Also used for sediment removal of surface water and underground water. Inlet turbidity less than 20 degrees, the outlet turbidity up to 3 degrees below.

It can be widely used in electronic power, petrochemical, metallurgy electroplating, paper textiles, pharmaceuticals dialysis, food and beverages, drinking water, factories and enterprises water, swimming pool. It also can meet the needs of liquid filtration in various industries.

Advantages

Multi-media carbon/sand filter tank in water treatment

A) High filtration efficiency.
B) Low resistance, high capacity, high sewage interception capability, long service life.
C) High cleanness of filter and no pollution of filtering media.
D) Anti acid-base.
E) High strength, high temperature resistant, no deformation.
F) Low purchasing cost and operation cost, easy to clean and replace filter cartridge.
G) Easy operating & maintenance

Parameters

Pressure rating: 0.25Mpa~2.5Mpa
Single filter flow :2-50 m3/hour
Working temperature range: 0 ~ 65 °C
Effluent turbidity:less-than 3
Inlet and outlet Connection: flange
Backwash water: for total filtered water 1 to 3%
Control mode: pressure control; PLC timing control
Sewage way: automatic
Rated operation voltage: can be customized

Application

Water treating, Raw water treating , Recycle water , Chilling water treat, Soft water treat
Agricultural irrigation ,such as Farms Water , Golf Water Filtration , Orchards and Groves Water Filtration , Vineyard Water Filtration etc .
Papermaking factory
Steel and lron plant
Petroleum Chemistry

Product description

Industrial Activated Carbon Water Filters or filtration of water is a process used to remove chlorine, foul taste; odor and color by using an activated carbon media bed either from select grades of bituminous coal or coconut-shell coal and produced into high density granular form. Activated Carbon Media is available in different sizes (mesh), examples: 12 x 40 or 8 x 30. When we decide that there is a need for an Industrial Activated Carbon Water Filters, it's essential to know the water source. In the event that it's city or well water from a trusted source, we can expect that there is a minimal amount of turbidity and we can use a 12 x 40 mesh AC media. In the event that the water source has high turbidity, or from a river or lake, in these cases we see the use of 8 x 30 mesh is a better choice.

Specification

The Industrial Activated Carbon Water Filters (ACF) system just like any media filters is composed of mineral tank (FRP or Steel), Valve controllers (Top or Side mounted) or Face-piping with Controllers, media (Gravel and Activated Carbon). ACF are available in different flow rate capacity and media volume. It can be configured to run as a single stand-alone unit or multiple-tanks which is running altogether or in sequence depending on the application. Smaller-sized units can have valve controllers like while medium-sized units can have air or electric actuated diaphragm valves which are controlled by a Digital Stager. Larger-units are normally designed with electrically-powered Butterfly valves and have PLC as the main controller. It practically have a service flow rate of (5 GPM/ft2) for ordinary odor, taste and chlorine loads and a minimum backwash rate of (10-12 GPM/ft2) to make sure that it is running in optimum conditions and prolong the life of the media. The media in the tank should only have a maximum of 50% depth level to allow the activated carbon media to expand by (30%-40%) during the backwash mode. The carbon bed should be replaced when the effectiveness to take out the contaminants are completely exhausted.

Features

Industrial Activated Carbon Water Filters systems is used as pre-treatment to RO systems as RO Membranes cannot have any trace of chlorine in the feed water. Chlorine chemically attacks the Thin Film Composite (TFC) membranes and over time results to degradation and develop holes where salt passes thru and blends with the permeate resulting to poor quality of product water. There are 2 types of Activated Carbon in the market (Bituminous Coal-based and Coconut Shell-based) and both of them have their advantages over the other. The coal-based activated carbon is best suited for treating surface water which has high Total Organic Compounds (TOC), water with high color content, waste water treatment and removal of bulky organic compounds from the water. The coconut shell-based will be best suited for trace-level organics removal due to higher surface area size. This is also tends to be harder, durable to abrasion and has lower ash content compared to the coal-based carbon.

Industrial Water Treatment Equipment Silica Sand Water Filter ISO 9001 Approval

Product description

Application

• Chemical, petroleum industrial, pharmaceutical, light industry, food, mineral processing, water treatment, electroplating, metallurgy, textile, dye industry.

Working Principle

• Mechanical sand filter, also known as pressure filter, is an important part of the pre-pure water pretreatment and water purification systerms.Mechanical sand filter packing is mainly used to reduce water turbidity, remove the water suspended particles, organic matter, colloidal particles, microorganisms, residual chlorine and some heavy metal ions.
• The turbidity of raw water require less than 20 degrees, and it will up to 3 degrees when the filtration completed.

industrial Water filter

Product description

The filter consists of a cylinder, a stainless steel strainer, a blowdown section, a transmission, and an electrical control section.

During Filter operation, the water to be filtered enters through the nozzle, flows through the filter screen, enters the pipeline required by the user through the outlet for process circulation, and the particle acrobatics in the water are trapped inside the filter screen. With such continuous circulation, more and more particles are trapped, the filtration speed is getting slower and slower, and the sewage entering the II is still continuously entering, and the filter holes will become smaller and smaller, thus between the inlet and the outlet. The pressure difference is generated. When the large difference reaches the set value, the differential pressure transmitter transmits an electric signal to the controller to control the crying start drive motor to drive the shaft to rotate through the transmission component, and the sewage outlet is opened and discharged by the sewage outlet. When the filter is cleaned, the pressure difference drops to the minimum value, the system returns to the initial filter, and the system runs normally.

Features

As per the industry standards

Easy maintenance

Durable

Automatic cleaning and filtration, automatic sewage discharge.

The cleaning filtration cycle can be adjusted, and the cleaning filtration time defaults to 10-60/s.

The amount of water lost by washing and filtering is only 0.08-0.6% of the filtered water volume;

Filtration accuracy can reach 10-3000 microns:

Working pressure can reach 1.0-1.6Mpa:

Single flow: 4-4160m3/ho

Can be installed in any position in vertical, horizontal or inverted orientation

Product description

Granular Activated Carbon (GAC) filtration systems use the adsorptive qualities of the media to remove highly dispersed compounds from water sources too small for the removal with standard multi-media filtration technology. These automatic filtration systems are extremely effective in removing chlorine and chlorine related compounds, organic chemicals, tastes and odors, halogenated organic compounds, hydrocarbons and other highly dispersed contaminants.All industrial media filters utilize our simple backwash system for ease of operation and consistent water quality. The automatically controlled filter systems operate for extended periods of time prior to a short backwash cycle.

Features of the industrial activated carbon water filter
The materials for the tank are: stainless steel, steel lined with rubber .
The surface finish can be matt polished or acid washing or mirror polished
The design pressure can be 10 bar g

Feature

1. Can meet the filtration precision requirement of the hydraulic system and also can block some impurities to enter into this system.
2. Filter element of this equipment has high strength which will not be damaged by the pressure.
3. High level of flow area; Low pressure loss.
4. Easy to clean and replace.

Application

1. Removal of chlorines, organic chemicals, taste and odor, halogenated organic compounds, hydrocarbons or other highly dispersed contaminants
2. Water treatment of boiler and water for domestic use
3. Deironing and demanganization of underground water
4. Pretreatment of desalination, reverse osmosis and electroosmosis
5.Treatment of all kinds of industrial wastewater and water reuse.

Parameter